Sprinkler use note

1 After the pump is started, no water is produced for 3 minutes. Check the machine for shutdown. 2 If abnormal phenomena occur during operation of the pump, such as noise, vibration, and water drop, it should be stopped immediately. Pay attention to the temperature rise of the bearing. The temperature must not exceed 75°C. (3) Observe whether the nozzle works normally, whether there is uneven rotation, too fast or too slow, or even no rotation phenomenon. Observe that the steering is flexible and there are no abnormalities. 4 Sprinkler irrigation should be avoided if there is too much sediment content, otherwise the impeller of the pump impeller and the nozzle of the sprinkler head will be easily worn, and the growth of the crop will be affected. 5 In order to adapt to different soil quality and crops, nozzles need to be replaced. When adjusting the rotation speed of the nozzles, the rocker springs can be tightened or relaxed. The rocker arm is suspended on the rocker shaft and can also be rotated to adjust the water depth of the rocker arm head to control the spray head speed. Adjusting the reversal position can change the reversal speed. 6 The sign of good nozzle speed adjustment is to use slow rotation speed as far as possible without generating surface runoff. Generally, the small nozzle rotates 1 cycle from 1 minute to 2 minutes, and the middle nozzle rotates 1 cycle from 3 minutes to 4 minutes. Sprinklers rotate 1 lap in 5 minutes to 7 minutes.
Maintenance 1 Loose parts of the unit should be fastened. 2 Lubricate the lubrication parts on time to ensure good lubrication and normal operation. The maintenance of the power unit and the water pump of the 3 units should be carried out according to the relevant instructions. 4 When the sprinkling irrigation unit is stopped for a long time, the water in the pump body must be drained, the water pump and sprinkler should be dismantled, the water stain should be wiped clean, the oil coating and assembly should be done, and the import and export package should be kept and stored in a dry place. The pipes should be washed and dried, and the hoses should be coiled into a dish and placed in a cool, dry place. Do not place the above parts in places with acid and alkali and high temperatures. 5 Threads on the frame or quick connectors and rust-prone areas should be properly oiled.

Intestinal localization was administered to reduce adverse effects.

Targeted site-specific release:

Two hours in gastric juice will not disintegrate or crack, dissolve within thirty minutes of disintegrating juice, providing a perfect solution for protein and peptide drugs and probiotics.

Enteric coated gelatin hollow capsule is made of gelatin and enteric coating material in gastric juice it will not collapse, but will release in the intestines as a collapse of a target product . It is often used for special packaging of drugs and health cae products which are irritating to the stomach or unstable under acid, or dissolved and effected in the intestine.

Intestinal location administration can improve the efficacy of drugs, reduce the dose and the adverse reaction, brings the convenience to patients. Moreover , it can avoid the degradation of gral protein, polypeptide or health care products and provide the best absorption sites for them.

Size 2 Soluble Empty Capsules

Enteric Capsules Empty,Blue Hard Empty Gel,Natural Hard Gelatin Capsule,Natural Empty Hard Gelatin Capsule

Zhejiang Honghui Capsule Co.,Ltd , https://www.hhcapsule.com