Ribbon mixer troubleshooting method

The ribbon mixer can mix a variety of materials into a homogeneous mixture, such as mixing cement, sand, gravel and water into concrete wet materials; it can also increase the contact surface area of ​​the material to promote chemical reactions; it can also accelerate physical changes. For example, the granular solute is added to the solvent, and the mixing and the like can be accelerated by the action of the mixing machine. The mixer bearing is at both ends of the mixer, the material is not easy to enter, and the maintenance rate is low.

How should we troubleshoot when the ribbon mixer fails? 1. If it is found to be suddenly stopped during use, the motor should be started after the discharge door is drained. 2. If there is leakage powder in the discharge door, the contact between the discharge door and the casing should be checked. If the sealing door is not tightly closed or the sealing strip is aging, the position of the travel switch should be adjusted or the sealing strip should be replaced. 3. If the discharging mechanism is not working properly, the cylinder and the air supply system should be inspected for faults. The mixer adopts U-shaped barrel structure, which has stable operation, uniform mixing, no dead angle, clean discharge and wide application range. The mixer is mainly made of wear-resistant alloy materials, including high-speed mixing blades, mixing fins, wear-resistant linings, mixing arms, mixing shovel, planetary shovel, mixing coulter, stirring rod, mixing shovel, etc. A mixer is a mechanical device that uniformly mixes two or more materials by mechanical force, gravity, or the like.