How to properly use and maintain mineral water filling machine

How to properly use and maintain mineral water filling machine

Nowadays, with the increasing demand for various beverages and daily chemical products, the development of filling machines has also been promoted. Mineral water filling machines are widely used in the production process of enterprises, and should be paid attention to when using filling machines. The details are related to the quality of the enterprise products and the production efficiency of the enterprise. Therefore, it is very important to do the installation, commissioning, use and maintenance of the filling machine. Here's a quick look at what you need to be aware of when using it?

First of all, before the mineral water filling machine is used, it must be installed and then debugged. Read the instructions carefully before commissioning and prepare the tools to be used. After the filling machine is installed, the filling rail and the bottle receiving tray are leveled, the liquid storage tank is filled with materials, and all the electrical switches are in the closed position. Insert the container to be filled into the tool box, connect the external power supply, the power socket must be a three-pin socket, and have a reliable grounding wire to prevent the machine from leaking power, turn the machine power switch to ON, and the power indicator light. The filling frame is supported by the filling support plate, and the positioning sleeve on the top filling head is pointed by hand. The positioning sleeve should be able to move up and down flexibly, and the filling needle is exposed or retracted without hindrance. Turn the switch under the liquid storage tank to the open position, so that the material can flow into the total metering pump. According to the total filling amount of each container, adjust the screw on the crank and rotate the knob of the filling speed control board to about 20 degrees. Then turn the switch on the filling speed control board to the open position. When the liquid flowing out of each filling head is a set amount, screw the liquid amount fine-tuning nut, cover the filling head casing, and loosen the filling frame support plate.

After the mineral water filling machine is used, pay attention to its maintenance. When removing and disassembling the piston during maintenance, remove the fixing screws at the same time to avoid affecting the other process requirements when disassembling the first one. Before the piston filler is cleaned, the remaining product should be removed and the tank filled with a mild cleaning solution. The cylinder has been lubricated at the factory. Please do not open or add any lubricating oil to ensure that the surface of the filling machine is clean and hygienic. In addition, while maintaining and properly using the filling machine, it is necessary to conduct regular inspections and commissioning. Only such a filling machine can work healthily and steadily.