Note on the use of violet light motor:
1. Please confirm whether the appearance of the geared motor is damaged before use. Is there any oil leakage?
2. Please confirm the voltage of the geared motor first. A voltage regulator can be added when the voltage is unstable.
3. Please confirm whether the specifications of the geared motor and the design specifications are consistent.
4. Please confirm the fixed base to avoid loosening when running the drive.
5. If sprocket, pulley, coupling, etc. are used, it must be installed in accordance with relevant regulations.
6. The lubricating oil has been placed in the body of the geared motor, and the lubricating oil is not replaced for 12000 hours.
7. When the geared motor is running, the rated current should not exceed the current value indicated on the motor nameplate.
8, please pay attention to the surrounding temperature, humidity, pH and other issues.
9. Adapt to the environment from -10 degrees to +40 degrees, humidity below 90%, indoor altitude below 1000 meters.
10. If it is not installed, maintained or operated in the correct way, it may cause serious damage to the geared motor.
11. When repairing or disassembling, make sure that the external power supply is completely folded off the geared motor.
12. The safety protection device must be installed to ensure absolute operation safety.
13. The motor needs a grounding wire. Please refer to the power distribution regulations.
14. Please confirm that all installed parts and transmission parts are fixed correctly.
Start the geared motor again.
15. If the geared motor is used with the inverter at low speed, an independent auxiliary cooling fan should be installed.
16. After the single-phase geared motor is powered off, some of the charge remains in the capacitor. Please discharge or ground the terminal first.
17. When the motor is installed vertically, please inform the technical department of the factory first.
?
Features of the violet light motor:
1. The violet light reduction motor is manufactured in accordance with international technical requirements and has a high technological content.
2, space saving, reliable and durable, with high overload capacity, power up to 3.7KW or more.
3, low energy consumption, superior performance, reducer efficiency of up to 95%.
4, low vibration, low noise, high energy, high-quality section steel material, steel cast iron box, the surface of the gear after high-frequency heat treatment.
5. After precision machining to ensure positioning accuracy, all of the gear reduction motors that make up the gear transmission assembly are equipped with various types of motors, forming an electromechanical integration, which fully guarantees the quality characteristics of the products.
6. The product adopts serialized and modular design ideas and has wide adaptability. This series of products has many motor combinations, installation positions and structural schemes. It can choose any speed and various structural forms according to actual needs.
Virus Specimen Collection Tube
Inspection principle:
It can perform protein denaturation on fresh clinical virus samples to inactivate the virus, prevent secondary transmission of infection, and ensure the safety of transportation and testing personnel.
♣.Structural composition: Combination of cotton swab and transport medium (VTM).
♣. Product requirements:
The product should be airtight, avoid high temperature, avoid direct sunlight storage. It should be used in a clean, hygienic, pollution-free, and temperature-friendly environment.
♣, Storage conditions and validity period:
â‘ , the product should be stored in a clean, dry and ventilated environment,
②, the temperature is 5℃-35℃;
â‘¢, relative humidity <85%RH;
â‘£, product shelf life: 12 months.
♣. How to use
â‘ Before sampling, mark relevant information on the label of the sampling tube.
â‘¡. Sampling with the corresponding cotton swabs.
â‘¢ After the collection is completed, quickly put the cotton swab into the collection tube, break the part higher than the sampling tube, and tighten the tube cover.
â‘£. For the specific sampling method, please refer to the following:
a) Nasal swab Gently insert the sampling head into the nasal cavity, stop for a while and then slowly rotate to exit, immerse the collected specimen in the Xiangxiang solution, break the excess part and discard it, and tighten the sampling tube cover.
b) Pharyngeal swab: Wipe bilateral pharyngeal tonsils and posterior pharyngeal wall with the sampling head, immerse the collected specimen in the sampling solution, break off the excess part and discard it, and tighten the cap of the sampling tube.
c), Mycoplasma Chlamydia, Ureaplasma specimen collection
Male: Insert the sampling head into the urethra about 2cm and rotate, stay for a while and then exit, and immerse the collected specimen in the sampling solution.
Female: Wipe the mucus of the cervical orifice, insert the sampling tip into the cervical canal for 1-2 cm for sampling, immerse the collected specimen in the sampling solution, break off the excess part and discard it, and tighten the cap of the sampling tube.
♣. Precautions
1. After the virus is collected, the disposable sampling swab should be completely inserted into the preservation solution, so that the virus can be retained to the greatest extent possible.
â‘¡ The collected specimens must be sent for inspection in time.
â‘¢. It is forbidden to use products with damaged packaging and expired validity period to prevent pollution.
This single-use Virus Sampling Tube is used for in vitro diagnosis. It cannot be used for human or animal oral or external use. If swallowed, it may cause serious events; it is irritating to eyes and skin. If it is not splashed into the eyes, rinse with water.
Virus Sampling Tube,Virus Specimen Collection Tube,Viral Transport Tube,Saliva Virus Sampling Kit
Jilin Sinoscience Technology Co. LTD , https://www.contoryinstruments.com