Simply rinse each time before using the meat grinder. Generally speaking, the meat grinder is cleaned in time after the last use. The cleaning before use is mainly to wash off the dust inside and outside the machine. Another benefit is that
Flushing before use will make the ground meat easier and smoother, and it will save the cleaning after the end of work.
How to install the meat grinder?
Many people like to install the machine after each piece of meat. In fact, this method is not desirable. Ideally, after each use, the cleaned meat grinder should be placed in a wooden cabinet in the form of loose parts, or assembled after it has been completely dried. It should not be assembled immediately. Installation begins with assembly, first feeding the roller into the machine cavity. To reduce wear, a drop of cooking oil can be placed on the shaft, and then the cutter head is mounted on the roller, paying attention to the knife edge facing outward. Then install the leak to the cutter head, gently shake to make the three close to the machine cavity, and then install the solid nut to the outside of the leak. Pay attention to the tightness of the leak. If it is too loose, the foam will leak out from the seam. It will be too tight. Damage to the silk mouth. Finally install the whip, pay attention to the handle facing outward, align the notch and then insert it, then screw on the solid screw. It is relatively simple to install the machine. The most important thing is to choose the appropriate fixing parts, such as the larger wooden board, align the nipple with the chopping board, and tighten the fastening screws after the edge. Because the ground meat is more powerful, it is best to use a screwdriver and other tools to assist the sturdy when fixing the body, in case the machine is loose during work.
The specific operation process of the meat grinder:
The real ground meat is relatively simple, because it is more forceful, so it is best to have male operation or two people. If it is stuffed dumplings, it is best to twist a green onion before the meat is mined, which will make the meat less laborious. Wash the meat, cut into long strips, and slowly feed it (the more meat you send, the more effort you have). After the meat is finished, you can also twist a green onion, or potatoes and other vegetables. To put it bluntly, this is a disguised cleaning that also reduces the waste of minced meat.
How to clean the meat grinder?
Prepare clean toothbrushes, test tubes and other auxiliary items, then unload the machine in the opposite direction, clean out the meat pieces in the machine cavity, and then soak the machine in warm water containing detergent, with a toothbrush, etc. Clean all the parts one by one and rinse them twice with tap water. Put it in a cool, ventilated place and control it.
Laser Illumination Cameras,Portable Laser Binoculars,Portable Laser Night Vision,Long Range Laser Night Vision
Hope Wish Photoelectronic Technology Co., Ltd , https://www.irhpws.com