330703-000-130-10-02-00
==========★Company Profile
For details, please deduct her Xu Xiaoyan
Contact her (same number on WeChat)
Are you looking for cost savings and more effective optimization of the business process of purchasing spare parts?
We can optimize your procurement process through e-commerce promotion,
Thus your direct and indirect costs. Provide a series of links to the spare parts you need. In addition, we have established links with more overseas suppliers.
Our e-commerce consultant will be happy to discuss your needs for spare parts with you.
+ Usability, + Responsiveness: Our main task is your satisfaction!
Our supply chain platform can ensure that you optimize the delivery of industrial parts cycle.
It plays a very important role in the automatic control system. Therefore, the correct choice of PLC is very important.
Faced with the most advanced types of PLCs from many manufacturers, they have their own advantages and disadvantages, which can satisfy the most advanced needs of users, but they are incompatible in terms of form, composition, function, network, and programming. , Without a consistent specification, horizontal comparison is impossible. Here are some opinions on PLC selection in the planning of automatic control system, which can be used as a reference when selecting PLC.
Able to compare the following aspects to choose a suitable product.
1. The amount of work
This is particularly important. At the beginning of the automatic control system planning, there should be an accurate statistics on the number of control points (digital and analog). This is often the primary condition for selecting a PLC. Generally, a PLC with 10% to 30% more control points should be selected. There are several considerations:
1. Able to compensate for missing points in the planning process;
2. It can be ensured that there can be a replacement point when there is a failure at a certain point in the running process;
3. The need to increase points in the future.
2. Operating environment
The operating environment is the hard target of PLC operations. The automatic control system frees people from busy work and harsh environments. It requires the automatic control system to be able to get used to the messy environment, such as temperature, humidity, noise, signal shielding, operating voltage, etc. The various PLCs are not the same. Be sure to choose products that are accustomed to the practical operating environment.
3. Communication network
Nowadays, PLC is no longer simple on-site control. PLC remote communication has become a problem that the control system must solve. However, the communication protocols drawn up by various manufacturers are very different and have poor compatibility. At this point, the following aspects should be considered first:
1. Communication between products of the same manufacturer. Each manufacturer has its own communication protocol, and there is more than one. This performance is obvious on large and medium-sized computers, but not the same on small and micro computers. Some manufacturers often do not have a relatively simple communication that is different from other protocols because of capacity, price, function and other considerations. Therefore, the primary consideration in this regard is the communication between different types of PLCs from the same manufacturer;
2. Communication between products of different manufacturers. If the planned automatic control system is part of the transformation of the existing automatic control system, and the PLC selected is different from the original system, perhaps two or more PLCs are required in the planning, and a different manufacturer’s PLC is selected. Products, which need to consider the communication issues between products of different manufacturers;
3. Whether it is beneficial to the future. Because the communication protocols drawn up by various manufacturers are different, and there is no consistent international standard, so the PLC selection is greatly restricted. It is necessary to consider a communication protocol that has a large impact, has development, is fully functional, and is close to common use.
FESTO FPC101
SIEMENS 6ES5 955-3LC14
TP420
OSAI OS5431
BALLUFF BIL0001 BILAMD0-T060A-01-S75
YASKAWA SGDM-15ADA
SMNB 3190
SIEMENS 6ES7 331-7KF01-0AB0
SIEMENS 3RW3028-1BB04
DANFOSS 131B0033 FC-302PK37T5E20H1XGXXXXSXXXXAXBXCXXXXDX
VEGA VEGACAP 62 CP62.XXAGDZKMX
ALPHA SP-075-MF1-5-1X1-001
SIEMENS 6ES5188-3UA11
ESA VT150W000AB
ABB 05SR 8221
LEROY SOMER FMV2307 3.5T DIN3380220B
KEB 07G6DDA-0AB0
STOBER C002F0420MT10
GE FANUC IC620ACC001C IC620ACC001C0195
SEW EURODRIVE: DFI INTERBUS 8230935
OMRON R88D-KN15F-ECT R88DKN15FECT
FESTO ADVUT-100X3-10-PA
ADVANTECH PPC-105T
SEW MC07A015-5A3-4-10
LEM LT-2000-S/SP
IBSIP400MEFOVFD13ADI4
SIEMENS 6SC6100-0AB00
SICK: C20S-030104A11
YASKAWA CIMR-VCBA0006BAA
SICK MSLZ01-25061A 1015671 MSLZ01-25061A
KH34ELI24
SEW MDX61B0005-5A3-4-0T
HONEYWELL 942-E3A-2D-1G1
ALLEN BRADLEY 2098-DSD-030-SE
SMC MGQL80-75
OMRON NT631C-ST141B-EV2
Disposable Endo Fascia Closure System
Disposable minimally invasive fascial closure device is a medical device used to close the abdominal fascia layer after laparoscopic surgery. The device consists of a needle and suture that can be inserted through a small incision in the skin and used to close the layers of fascia without the need for a larger incision. The device is designed to reduce the risk of complications associated with traditional methods of fascial closure, such as wound infection, hernia and dehiscence. The single-use nature of the device also reduces the risk of cross-contamination and infection. Use of the device could shorten recovery time and improve outcomes for patients undergoing laparoscopic surgery.
Disposable Endo Fascia Closure System,Medical Instrument Abdominal Stapler,General Surgery Abdominal Wall Stapler,Sterile Fascial Closure Device
Changzhou Weipu Medical Devices Co., Ltd. , https://www.wmlaparoscopic.com