Rotary Granulator This machine is a device that uses S-type milling cutter to pass the material through the sieve hole of the stainless steel sieve cylinder. In the pharmaceutical industry, the mixed (wet) powder is granulated and used as a granule, tablet, capsule, and the like. In chemical applications, the mixed (wet) powder is not ground into granules, such as pesticide water-dispersible granules. The food industry uses granules for solid beverages, condiments and health supplements such as chicken essence, seafood essence, brown sugar, bitter buckwheat, radix isatidis, cordyceps sinensis, and Tianshan snow lotus.
Today I want to introduce to you how to operate and maintain this pellet machine correctly. Let's take a look at it.
The construction of the equipment mainly has the following points:
1. Main body: The fuselage is an independent rectangular cylinder. The upper bearing housing is connected with the powder bucket. The powder bucket extends to the outside of the machine. The V-shaped chassis is installed underneath. The ground is wide and flat, so the lower part must be installed. Can be placed indoors at will.
2. Granule manufacturing device: the rotating drum is placed horizontally under the powder bucket, and there are bearing supports on the front and rear. It is driven by the rack to make the reverse rotation. The front bearing cap of the end face is movable. The next wing nut, the bearing cap and the rotating drum can be extracted. The two ends of the roller are formed with a convex square ring embedded in the bearing chamber, so that the oil does not penetrate into the powder and does not stick.
3. Reducer: Adopt worm gear transmission, the speed ratio is 1:12. The oil can be stored in the box to ensure good gear lubrication and no noise. The mirror can be observed on the box, observe the operation and oil storage, and the outer end of the worm wheel. Equipped with an eccentric shaft to drive the rack to reciprocate.
Pay attention to the following two points during installation:
1. This machine is packed in the whole box. After unpacking, move it to the appropriate place of use and use it after leveling.
2, the electrical circuit device: should pay attention to the direction of rotation, do not reverse, because the worm has a flat ball bearing at one end, the direction of the force must be on the bearing, otherwise it will cause damage to the other end of the worm, affecting the service life of the machine.
Description of the function of the device
1. Usage: Start the machine and pour the mixture into the bucket. The rocking effect of the rotating drum will form particles through the wire mesh and fall into the container. If the crushing block is added, it should be gradually added. The pressure is too large and the screen is fragile.
2, Note: If the powder does not stagnate in the powder bucket, do not use the hand to shovel, so as not to cause injury, use bamboo shovel or parking work.
In the daily maintenance, there are the following points:
1. Check the machine regularly and check it once a month to check whether the worm gear, the worm, the bolts on the lubrication block, the bearing and other moving parts are flexible and wearable. The defects should be repaired in time and should not be used barely.
2. The machine should be used in a dry and clean room. It should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then installed, ready for the next use.
4. When the drum moves before and after the work, please adjust the M10 screw of the front bearing to the appropriate position. If the gear shaft is swaying, please adjust the M10 screw on the back of the bearing frame to the appropriate position, adjust the clearance so that the bearing does not sound, turn the pulley by hand, and tighten it properly. If it is too tight or too loose, the machine may be damaged. .
5. If the deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and covered with a cloth.
Finally, pay attention to the lubrication of the machine:
1. The tank part of the machine is equipped with oil meter. It should be refueled once before driving. It can be added according to the temperature rise and operation of each bearing.
2. The worm gear box must store oil for a long time. The height of the oil surface is all invaded into the oil. If it is used frequently, it should be replaced with new oil every three months. There is oil plug at the bottom of the sputum.
3. When the machine is refueling, do not let the oil spill out of the cup, and do not flow to the surroundings of the machine and the ground. Because oil is easy to contaminate materials, affecting product quality.
The above is about how to properly operate and maintain the entire contents of the rotary pellet machine , I hope to help the fight.
Today I want to introduce to you how to operate and maintain this pellet machine correctly. Let's take a look at it.
The construction of the equipment mainly has the following points:
1. Main body: The fuselage is an independent rectangular cylinder. The upper bearing housing is connected with the powder bucket. The powder bucket extends to the outside of the machine. The V-shaped chassis is installed underneath. The ground is wide and flat, so the lower part must be installed. Can be placed indoors at will.
2. Granule manufacturing device: the rotating drum is placed horizontally under the powder bucket, and there are bearing supports on the front and rear. It is driven by the rack to make the reverse rotation. The front bearing cap of the end face is movable. The next wing nut, the bearing cap and the rotating drum can be extracted. The two ends of the roller are formed with a convex square ring embedded in the bearing chamber, so that the oil does not penetrate into the powder and does not stick.
3. Reducer: Adopt worm gear transmission, the speed ratio is 1:12. The oil can be stored in the box to ensure good gear lubrication and no noise. The mirror can be observed on the box, observe the operation and oil storage, and the outer end of the worm wheel. Equipped with an eccentric shaft to drive the rack to reciprocate.
Pay attention to the following two points during installation:
1. This machine is packed in the whole box. After unpacking, move it to the appropriate place of use and use it after leveling.
2, the electrical circuit device: should pay attention to the direction of rotation, do not reverse, because the worm has a flat ball bearing at one end, the direction of the force must be on the bearing, otherwise it will cause damage to the other end of the worm, affecting the service life of the machine.
Description of the function of the device
1. Usage: Start the machine and pour the mixture into the bucket. The rocking effect of the rotating drum will form particles through the wire mesh and fall into the container. If the crushing block is added, it should be gradually added. The pressure is too large and the screen is fragile.
2, Note: If the powder does not stagnate in the powder bucket, do not use the hand to shovel, so as not to cause injury, use bamboo shovel or parking work.
In the daily maintenance, there are the following points:
1. Check the machine regularly and check it once a month to check whether the worm gear, the worm, the bolts on the lubrication block, the bearing and other moving parts are flexible and wearable. The defects should be repaired in time and should not be used barely.
2. The machine should be used in a dry and clean room. It should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.
3. After the machine is used or stopped, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then installed, ready for the next use.
4. When the drum moves before and after the work, please adjust the M10 screw of the front bearing to the appropriate position. If the gear shaft is swaying, please adjust the M10 screw on the back of the bearing frame to the appropriate position, adjust the clearance so that the bearing does not sound, turn the pulley by hand, and tighten it properly. If it is too tight or too loose, the machine may be damaged. .
5. If the deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and covered with a cloth.
Finally, pay attention to the lubrication of the machine:
1. The tank part of the machine is equipped with oil meter. It should be refueled once before driving. It can be added according to the temperature rise and operation of each bearing.
2. The worm gear box must store oil for a long time. The height of the oil surface is all invaded into the oil. If it is used frequently, it should be replaced with new oil every three months. There is oil plug at the bottom of the sputum.
3. When the machine is refueling, do not let the oil spill out of the cup, and do not flow to the surroundings of the machine and the ground. Because oil is easy to contaminate materials, affecting product quality.
The above is about how to properly operate and maintain the entire contents of the rotary pellet machine , I hope to help the fight.
Probiotics are a group of active microorganisms that are beneficial to the host by colonizing the body and changing the composition of the host flora in a certain area. It is a single microorganism or a mixture of microorganisms with well-defined composition that can produce beneficial effects on health by regulating the immune function of the host mucosa and system or by regulating the balance of flora in the intestine and promoting nutrient absorption to maintain a healthy intestine.
The probiotics that scientists have discovered so far can be broadly divided into three major categories which include.
â‘ Lactobacillus class such as Lactobacillus acidophilus, Lactobacillus casei, Lactobacillus janus, Lactobacillus lamanis, etc.
â‘¡Bifidobacteria category such as Bifidobacterium longum, Bifidobacterium shortum, Bifidobacterium ovale, Bifidobacterium thermophilum, etc.
â‘¢ Gram-positive cocci such as Streptococcus faecalis, Lactococcus lactis, Streptococcus intermedius, etc.
Probiotics:Lactobacillus;Bifidobacteria;Lactococcus lactis
Shaanxi Zhongyi Kangjian Biotechnology Co.,Ltd , https://www.zhongyibiology.com