a brief introdction
The desktop centrifuge is a routine laboratory centrifuge, widely used in research, education and production departments of biology, chemistry, medicine, etc. The high-speed desktop centrifuge has a maximum speed of 10000R/MIN, which is suitable for rapid separation and synthesis of trace samples, such as nucleic acid hybridization.
Detailed introduction of high speed centrifuge
Product introduction:
The desktop centrifuge is a routine laboratory centrifuge, widely used in research, education and production departments of biology, chemistry, medicine, etc. The high-speed desktop centrifuge has a maximum speed of 10000R/MIN, which is suitable for rapid separation and synthesis of trace samples, such as nucleic acid hybridization.
Safety instructions
1. If you find that the power indicator is off when you turn it on, you should stop it immediately.
2. It is strictly forbidden to run without load when the rotor is not installed.
3. Check the rotor for corrosion damage before running.
4. Do not open the centrifuge cover while the rotor is running, do not touch the running rotor.
5. It is strictly forbidden to run the rotor under unbalanced loading conditions.
Instructions for use:
1. The table of the centrifuge should be flat and sturdy. The workroom is neat, clean and well ventilated.
2. Press the lock button to open the lid. Turn on the external power supply, close the power switch, and the indicator light is on.
3. Turn off the power switch.
4. Open the centrifuge cover and wipe the inner cavity and rotor.
5. Load a test tube with the same weighing.
6. Close the centrifuge lid.
7. Set the timing.
8. Close the power switch.
9. Adjust the speed control knob to the desired speed.
10. Before the stop, the high-speed knob must be set to the minimum position “Timer†to “Zeroâ€. Turn off the power switch to cut off the power.
11. Wipe the inner cavity and the rotor and close the centrifuge cover.
Maintenance and maintenance:
1. Do not place anything on the centrifuge cover. After each use, be sure to clean the inner cavity and rotor, and cover the centrifuge cover to prevent dust and dirt from entering.
2. If the centrifuge is not used for a long time, open the centrifuge cover for a period of time and dry the inner cavity.
3. After the motor's carbon brush is used for 3,000 hours, it should be replaced in time to avoid wearing the commutator.
After long-term use of the centrifuge, natural wear is a normal phenomenon. After one year of use, if there is a failure or a problem, the company will continue to provide quality services and assist in handling it.
Anti-biotic,Cloxacillin Benzathine Antibiotic,Gentamycin Sulfate Powder,Active Ingredients Micronomicin Powder,Amikacin Disulfate Salt Powder,
Xi'an Henrikang Biotech Co., Ltd., located in Gaoling Industrial Park, Xi`an city, Shaanxi Province, China. It is a professional supplier of Antibiotic & Antibacterial Product Raw Material,Beta Cyclodextrin Powder and natural active ingredients. It has absolute advantage because of strong research strength, modern management system and high-quality marketing team.
the factory is equipped with the researching and quality inspection centre, with strong technology research and development strength. We also have 3 salesdepartments over 30 people and sell our products all over the world.For customer`s needs, OEM service is also acceptable. If you have a good idea in new product production but lack of laboratory device and human resource, we are glad to solve this problem for you. Sincerely hope to strengthen exchanges and cooperation with friends from both home and abroad.
Anti-biotic,Cloxacillin Benzathine Antibiotic,Gentamycin Sulfate Powder,Active Ingredients Micronomicin Powder,Amikacin Disulfate Salt Powder
Xi'an Henrikang Biotech Co.,Ltd , https://www.henruikangbio.com